mriconvert: converting structural

[Jolinda Smith]

Yoshiko,

MRIConvert thinks one of your slices doesn't belong with the others. This may or may not (probably not) be the correct behavior. Can you copy the dicoms to a public directory on bordeaux and let me know where they are (or just put them on a flash drive)?

Jolinda

On Wed, 15 May 2013 16:46:41 -0700, Yoshiko Yamada <yyamada at uoregon.edu> wrote:

> Hi Jolinda,
>
> I'm converting DICOM structural to FSL NifTi using MRIConvert version
> 2.0 rev.150.
> In the option, "Save each series ..." is checked, but "Save multivolume
> series..." is unchecked.
>
> When conversion is done, 2 .nii files are generated, one with  "_1"
> attached just before the .nii extension, and the other one without "_1".
>
> The one without seems to contain 2D, not 3D, image. Is there any reason
> why such file is generated? Could it be an indication that I didn't set
> the option correctly? More importantly, is the 3D file with "_1"
> converted OK? (It certainly looks OK to me.)
>
> Thank you!
>
> -Yoshiko
>
>
> _______________________________________________
> mriconvert mailing list
> mriconvert at lists.uoregon.edu
> https://lists-prod.uoregon.edu/mailman/listinfo/mriconvert
>


-- 
Jolinda Smith, Ph.D.
MR Physicist
Interim Director of Operations
Lewis Center for Neuroimaging
University of Oregon
Eugene, OR USA