mriconvert: mcverter outputs are not the same as MRI Convert outputs

[Justin Chang]

Hi Jolinda,

Good question, I'm not sure?

How do I check?

Regards
Justin

JUSTIN CHANG | Business Portfolio Manager Research | Information and Communications Technology

THE UNIVERSITY OF SYDNEY
Level 3 Services Building G12 | The University of Sydney | NSW | 2006
P +61 2 9114 0516
E justin.chang at sydney.edu.au<mailto:justin.chang at sydney.edu.au>  | W  http://sydney.edu.au

CRICOS 00026A
This email plus any attachments to it are confidential and are subject to a claim for privilege. Any unauthorised use is strictly prohibited.  If you receive this email in error, please delete it and any attachments.

Please think of our environment and only print this e-mail if necessary.

On 13 May 2014, at 7:18 pm, "jolinda at uoregon.edu<mailto:jolinda at uoregon.edu>" <jolinda at uoregon.edu<mailto:jolinda at uoregon.edu>> wrote:

Are you using the same output format in both cases, or fsl nifti in one case and vanilla nifti in the other?

Sent from my HTC

----- Reply message -----
From: "Justin Chang" <justin.chang at sydney.edu.au<mailto:justin.chang at sydney.edu.au>>
To: "mriconvert at lists.uoregon.edu<mailto:mriconvert at lists.uoregon.edu>" <mriconvert at lists.uoregon.edu<mailto:mriconvert at lists.uoregon.edu>>
Subject: mriconvert: mcverter outputs are not the same as MRI Convert outputs
Date: Tue, May 13, 2014 8:42 AM


Hi,

I have been comparing .nii outputs from mcverter and MRI Convert and I am unable to get mcverter outputs to match those produced using the MRI Convert GUI. It appears that mcverter is flipping the alignment .

The configurations I have been using for DICOM data (T1, T2 and DTI)

T1 GUI Configuration:
- Save each subject in a separate directory (unchecked)
- Save each series in a separate directory (unchecked)
- Save multivolume series as 4D files (unchecked)
- Skip volumes for multivolume series (0)
- Apply rescale slope and intercept to data (unchecked)
- save as .nii file (checked)

T1 Terminal
$ mcverter -o ~/Desktop/DICOM/T1 -f nifti -n ~/Desktop/NIFTI/

T2 GUI Configuration:
- Save each subject in a separate directory (unchecked)
- Save each series in a separate directory (unchecked)
- Save multivolume series as 4D files (checked)
- Skip volumes for multivolume series (0)
- Apply rescale slope and intercept to data (unchecked)
- save as .nii file (checked)

T2 Terminal
$ mcverter -o ~/Desktop/DICOM/T2 -f nifti -n -d ~/Desktop/NIFTI/

DTI GUI Configuration:
- Save each subject in a separate directory (unchecked)
- Save each series in a separate directory (unchecked)
- Save multivolume series as 4D files (checked)
- Skip volumes for multivolume series (0)
- Apply rescale slope and intercept to data (unchecked)
- save as .nii file (checked)

T2 Terminal
$ mcverter -o ~/Desktop/DICOM/DTI -f nifti -n -d –s 7 ~/Desktop/NIFTI/

Is there any errors in my terminal argument that could be causing this issue?

Kind regards
Justin

JUSTIN CHANG | Business Portfolio Manager Research
Information and Communications Technology

THE UNIVERSITY OF SYDNEY
Level 3 Services Building G12 | The University of Sydney | NSW | 2006
P +61 2 9114 0516  M +614 0039 4246
E justin.chang at sydney.edu.au<mailto:justin.chang at sydney.edu.au><mailto:justin.chang at sydney.edu.au> W  http://sydney.edu.au<http://sydney.edu.au/>

CRICOS 00026A
This email plus any attachments to it are confidential and are subject to a claim for privilege. Any unauthorised use is strictly prohibited.  If you receive this email in error, please delete it and any attachments.
Please think of our environment and only print this e-mail if necessary.


_______________________________________________
mriconvert mailing list
mriconvert at lists.uoregon.edu<mailto:mriconvert at lists.uoregon.edu>
https://lists-prod.uoregon.edu/mailman/listinfo/mriconvert
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists-prod.uoregon.edu/pipermail/mriconvert/attachments/20140513/22876298/attachment-0001.html>